Non metalic rigid conduit with internal an external plain wall. This pipe is make with rigid PVC, 1250N (4422) and 750N (3322)
Uses
Suitable for the conduction of electrical cables in visible installations, due to its good characteristics in terms of resistance to compression, impact, dielectric strength and insulation resistance.
Characteristics
Colours
Orange
Fire behaviour
No propagator of the flame
Dimensions
16, 20, 25, 32, 40, 50 Y 63 mm
Level of protection
IP 54
Standard
IEC 61386-21
Electrical properties
Insulating
Compressive strength
1250 ó 750 N
Bending resistance
Rigid
Impact resistance
6 J
Maximum temperature
+ 90 ºC
Minimum temperature
-5 ºC
Connection
By flared
Technical data
| Nominal Diameter (mm) | External Diameter (mm) | Diameter (mm) | Minumum Inside Diameter (mm) | Minimum entry lenght (mm) |
|---|---|---|---|---|
| 16 | 16 | -0/+0,3 | 10.7 | 16 |
| 20 | 20 | -0/+0,3 | 14.1 | 20 |
| 25 | 25 | -0/+0,3 | 18.3 | 25 |
| 32 | 32 | -0/+0,3 | 25.3 | 30 |
| 40 | 40 | -0/+0,3 | 31.2 | 32 |
| 50 | 50 | -0/+0,3 | 39.6 | 42 |
| 63 | 63 | -0/+0,3 | 52.6 | 50 |
| Nominal Diameter (mm) | 16 |
|---|---|
| External Diameter (mm) | 16 |
| Diameter (mm) | -0/+0,3 |
| Minumum Inside Diameter (mm) | 10.7 |
| Minimum entry lenght (mm) | 16 |
| Nominal Diameter (mm) | 20 |
|---|---|
| External Diameter (mm) | 20 |
| Diameter (mm) | -0/+0,3 |
| Minumum Inside Diameter (mm) | 14.1 |
| Minimum entry lenght (mm) | 20 |
| Nominal Diameter (mm) | 25 |
|---|---|
| External Diameter (mm) | 25 |
| Diameter (mm) | -0/+0,3 |
| Minumum Inside Diameter (mm) | 18.3 |
| Minimum entry lenght (mm) | 25 |
| Nominal Diameter (mm) | 32 |
|---|---|
| External Diameter (mm) | 32 |
| Diameter (mm) | -0/+0,3 |
| Minumum Inside Diameter (mm) | 25.3 |
| Minimum entry lenght (mm) | 30 |
| Nominal Diameter (mm) | 40 |
|---|---|
| External Diameter (mm) | 40 |
| Diameter (mm) | -0/+0,3 |
| Minumum Inside Diameter (mm) | 31.2 |
| Minimum entry lenght (mm) | 32 |
| Nominal Diameter (mm) | 50 |
|---|---|
| External Diameter (mm) | 50 |
| Diameter (mm) | -0/+0,3 |
| Minumum Inside Diameter (mm) | 39.6 |
| Minimum entry lenght (mm) | 42 |
| Nominal Diameter (mm) | 63 |
|---|---|
| External Diameter (mm) | 63 |
| Diameter (mm) | -0/+0,3 |
| Minumum Inside Diameter (mm) | 52.6 |
| Minimum entry lenght (mm) | 50 |
